ZyXEL p-2302hw-p1 ユーザーズマニュアル
P-2302HW/HWL-P1 Series User’s Guide
178
Chapter 13 VoIP Trunking
Figure 91 VoIP > Trunking > Peer Call
Each field is described in the following table.
LABEL
DESCRIPTION
Outgoing
Authentication
Authentication
You need to set up accounts for the peer devices you use in VoIP trunking. This is
the IP address of the remote peer device, as well as the username and password
needed to authenticate with the remote peer device.
the IP address of the remote peer device, as well as the username and password
needed to authenticate with the remote peer device.
#
This is an index number of your outgoing authentication accounts.
Name
Enter a descriptive name for the remote peer device of this account. For example,
if the peer device is located in London, you might enter London as the account
name. This name is used when you configure call rules in the VoIP > Trunking >
Call Rules screen.
if the peer device is located in London, you might enter London as the account
name. This name is used when you configure call rules in the VoIP > Trunking >
Call Rules screen.
Username
Enter the username needed to authenticate at the remote peer device. The remote
peer device must have the same username in an incoming authentication entry in
order to authenticate your connection. Enter up to 32 alphanumeric characters.
peer device must have the same username in an incoming authentication entry in
order to authenticate your connection. Enter up to 32 alphanumeric characters.