ZyXEL g-2000 plusv2 ユーザーガイド
ZyXEL G-2000 Plus v2 User’s Guide
Chapter 19 Introducing the SMT
235
C
H A P T E R
19
Introducing the SMT
This chapter explains how to access and navigate the System Management Terminal and gives
an overview of its menus.
19.1 SMT Introduction
The ZyXEL device’s SMT (System Management Terminal) is a menu-driven interface that
you can access from a terminal emulator through the console port or over a telnet connection.
This chapter shows you how to access the SMT (System Management Terminal) menus, how
to navigate the SMT and how to configure SMT menus.
you can access from a terminal emulator through the console port or over a telnet connection.
This chapter shows you how to access the SMT (System Management Terminal) menus, how
to navigate the SMT and how to configure SMT menus.
19.2 Connect to your ZyXEL device Using Telnet
The following procedure details how to telnet into your ZyXEL device.
1 In Windows, click Start (usually in the bottom left corner), Run and then type “telnet
192.168.1.1” (the default IP address) and click OK.
2 For your first login, enter the default password “1234”. As you type the password, the
screen displays an asterisk “*” for each character you type.
Figure 106 Login Screen
3 After entering the password you will see the main menu.
Please note that if there is no activity for longer than five minutes (default timeout period)
after you log in, your ZyXEL device will automatically log you out. You will then have to
telnet into the ZyXEL device again. You can use the web configurator or the CI commands to
change the inactivity time out period.
after you log in, your ZyXEL device will automatically log you out. You will then have to
telnet into the ZyXEL device again. You can use the web configurator or the CI commands to
change the inactivity time out period.
19.2.1 Entering Password
The login screen appears after you press [ENTER], prompting you to enter the password, as
shown next.
shown next.
For your first login, enter the default password “1234”. As you type the password, the screen
displays an asterisk “*” for each character you type.
displays an asterisk “*” for each character you type.
Password : xxxx