Sharp MX-2300N ユーザーガイド

ページ / 843
37
Specifying the size by entering numerical values.
When scanning a non-standard size original such as a postcard or card, follow these steps to specify the original size.
The width can be from 2-1/2" to 17" (64 mm to 432 mm), and the length can be from 2-1/2" to 11-5/8" (64 mm to 297 mm).
1
Display the original settings screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Original] key.
The automatically detected size appears at the top of the 
[Original] key.
2
Touch the [Scan Size] key.
3
Enter the scan size (original size).
(1) Touch the [Size Input] tab.
(2) Touch the [X] key and enter the X 
(horizontal) dimension with the 
 
keys.
(3) Touch the [Y] key and enter the Y (vertical) 
dimension with the 
 keys.
(4) Touch the [OK] key.
System Settings (Administrator): Original Size Detector Setting
This is used to set the size entry screen to "inch units" or "mm units".
4
Touch the [OK] key.
The specified size appears in the [Scan Size] key.
• When the scan size is specified by numerical values, the send size cannot be specified.
• When the automatic document feeder is used, an original longer that 17" (432 mm) can be scanned (maximum length 
31-1/2" (800 mm)). To scan a long original, touch the [Standard Size] tab in the screen of step 3 and then touch the [Long 
Size] key.
 (page 36)
Quick File
File
Special Modes
Address Entry
Address Book
Scan
Mode Switch
Image
Settings
Send Settings
Auto
Exposure
200X200dpi
Resolution
PDF/PDF
File Format
Special Modes
Original
Auto  8 x11 
/
 2
Mono2/Auto
Color Mode
(1)
(2)
Scan
Original
100%
OK
Scan Size
Auto  8 x11 
/
 2
2-Sided
Booklet   
2-Sided
Tablet   
Send Size
Auto
Image Orientation
Scan
Original
17
11
OK
Size Input
Standard Size
(2_1/2  17)
 inch
(2_1/2  11_5/8)
 inch
X
Y
Auto
Manual
Manual
X
Y
(4)
(2), (3)
(1)
Scan
Original
2-Sided
Booklet   
2-Sided
Tablet   
OK
Scan Size
Send Size
Auto
Image Orientation
X17 Y11