Sharp MX-2300N ユーザーガイド

ページ / 843
39
CHANGING THE COLOR MODE
This procedure is used to change the color mode used to scan the original when the [COLOR START] key (
) or 
the [BLACK & WHITE START] key (
) is pressed.
Start key
Mode
Scanning method
[COLOR START] key
Auto
The machine detects whether the original is color or black and white and 
automatically selects full color or black and white (Mono 2 or Grayscale) 
scanning.
Full Color
The original is scanned in full color. This mode is best for full color originals 
such as catalogues.
[BLACK & WHITE 
START] key
Mono2
Colors in the original are scanned as black or white. This mode is best for 
text-only originals.
Grayscale
The colors in the original are scanned in black and white as shades of gray 
(grayscale).
1
Display the color mode screen.
(1) Touch the [Image Settings] key.
(2) Touch the [Color Mode] key.
2
Select the color mode.
(1) Touch the key of the mode to be used when 
the [COLOR START] key (
) is 
pressed.
You can select whether black & white scanning will take 
place in Mono 2 or grayscale when [Auto] is selected and 
a black and white original is scanned. Note that if the file 
format is set to JPEG, scanning will take place in 
grayscale.
(2) Touch the key of the mode to be used when 
the [BLACK & WHITE START] key (
) is 
pressed.
(3) Touch the [OK] key.
• System Settings (Administrator): Default Color Mode Settings
The default color mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the color mode.
Quick File
File
Special Modes
Address Entry
Address Book
Scan
Mode Switch
Image
Settings
Send Settings
Auto
Exposure
200X200dpi
Resolution
PDF/PDF
File Format
Mono2/Auto
Color Mode
Special Modes
Original
Auto  8 x11 
/
 2
(1)
(2)
Scan
Color Mode
OK
Mono2
B/W
Full Color
Color
Grayscale
Grayscale
Color Mode
B/W Mode
Auto
Mono2
(2)
(1)
(3)