Sharp MX-2300N ユーザーガイド

Fax reception can be activated from an extension phone 
connected to the machine by entering a 1-digit number 
and pressing the 

 key twice on the phone's keypad. 

This number is called the remote reception number, and 
you can set it to any number from "0" to "9".
Specify the number with the 

 keys and touch the 

[OK] key. (To make the number change quickly, keep 
your finger on the 

 or 

 key.)

When a transaction report is printed following a memory 
transmission, this setting is used to have part of the first 
page of the original printed on the transaction report. 
When printing of transaction reports is disabled, this 
function will not operate.
Select [Print Out All Report], [Print Out Error Report 
Only], or [No Printed Report] for the condition for printing 
the original on transaction reports and touch the [OK] 
key.

These settings are used to set the conditions for printing 
transaction reports for single transmissions, broadcast 
transmissions, receptions, and confidential receptions.
For each type of operation, touch the key of the desired 
condition.

The default settings are indicated in gray 

.

This is used to have the Image Sending Activity Report 
that is stored in the machine's memory printed at regular 
intervals.
The Image Sending Activity Report can be set to 
automatically print each time the number of transactions 
reaches 200, and it can also be set to automatically print 
at a specified time (once a day only). (Both settings can 
be selected.)
When the [Auto Print at Memory Full] checkbox 

 is 

selected, the Image Sending Activity Report will 
automatically print when the number of transactions 
reaches 200.
To have the report print automatically at a specified time, 
select the [Print Daily at Designated Time] checkbox 

. The "Hour" and "Minute" keys will appear at the 

right.

Touch the "Hour" and "Minute" keys and specify the 
setting of each with the 

 keys. When finished, 

touch the [OK] key. The report will print at the specified 
time.

Line conditions can sometimes distort a transmitted fax 
image. When ECM (Error Correction Mode) is turned on, 
pages that are distorted are automatically re-transmitted.
To enable this setting, select the checkbox 

 and 

touch the [OK] key.
This setting is enabled by factory default.

Print Out All Report

Print Out All Report

Print Out Error Report 
Only

Print Out Error Report 
Only

No Printed Report

No Printed Report

Print Out All Report

Print Out Notice Page

Print Out Error Report only

Not Print Out Notice Page

No Printed Report

• If you only select the [Print Daily at Designated 

Time] checkbox 

 and the number of recorded 

transactions reaches 200 before the specified time, 
each new transaction will delete the oldest 
transaction (the oldest transaction will not be 
printed).

• The Image Sending Activity Report can also be 

printed manually. See "

" 

(page 186).

If the other machine supports Super G3, ECM will 
function regardless of this setting.

System Settings

Activity Report Print Select Setting

Auto Print at Memory
Full

Print Daily at 

Designated Time

Minute

Hour

00

00

OK