Sharp MX-5500N 操作ガイド

When a transaction report is printed for a memory 
transmission, this is used to print part of the first page of 
the transmitted original on the transaction report. Select 
one of the settings below.

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

This setting will not be effective if "

" below is set to "No Printed Report".

This is used to select whether or not a transaction report 
will be printed, and if printed, the condition for being 
printed. Select a setting for each of the following 
operations:

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

• Print Out All Report
• Print Out Error Report Only
• No Printed Report

• Print Out Notice Page
• No Printed Report

When a transaction report is printed, you can have part 
of the first page of the transmitted original printed on the 
transaction report. For more information, see "

".

This is used to have the Image Sending Activity Report 
that is stored in the machine's memory printed at regular 
intervals.
The Image Sending Activity Report can be set to 
automatically print each time the number of transactions 
reaches 200, and it can also be set to automatically print 
at a specified time (once a day only). (The settings can 
be simultaneously enabled.)

Line conditions can sometimes distort a transmitted fax 
image. When ECM (Error Correction Mode) is turned on, 
pages that are distorted are automatically re-transmitted.

If multiple telephone numbers have been assigned to 
your telephone line, the number called can be identified 
by its ringing pattern. By using one number for voice 
calls and another number for faxes, you can tell which 
type of call you are receiving by the ringing pattern. You 
can set your machine to automatically receive faxes 
when your fax number is called by setting the pattern 
that corresponds to your fax number. Six selections are 
available.

• If you only select the "Print Daily at Designated 

Time" setting 

 and the number of recorded 

transactions exceeds 200 before the specified time, 
each new transaction will delete the oldest 
transaction (the oldest transaction will not be 
printed).

• The Image Sending Activity Report can also be 

printed manually. See "

" 

(page 85).

If the other machine supports Super G3, ECM will 
function regardless of this setting.