Sharp MX-5500N 操作ガイド

This is used to store sender names used in "Own 
Number Select". A maximum of 18 names can be stored.

Add New
Store a sender name. A maximum of 20 characters can 
be entered for the sender name. Control numbers are 
from 01 to 18. The lowest number not yet in use is 
automatically assigned when you begin the storing 
procedure. This number cannot be changed.

Sender Name List
This shows the currently stored sender names.
A sender name can be selected to delete it.

Settings for fax reception can be configured.

This setting is used to select the number of rings on 
which the machine automatically receives a call and 
begins fax reception in auto reception mode. Any 
number from 0 to 15 can be selected.

This is used to have received faxes printed on both sides 
of the paper.
When this setting is enabled and a fax consisting of 2 or 
more pages is received (the pages must be the same 
size), the pages are printed on both sides of the paper.

When a fax is received that includes the sender's name 
and number, the received image is slightly larger than 
the standard size. This setting is used to automatically 
reduce the image to fit the standard size.

If you select "0" for the number of rings, the machine 
will immediately answer and begin fax reception 
without ringing in auto reception mode. 

• If Auto Receive Reduce is disabled, the edges of 

the image outside the standard size will be cut off. 
However, the image will be clearer because it will 
be printed at the same size as the original.

• Standard sizes are sizes such as 8-1/2" x 11" and 

8-1/2" x 5-1/2" (A4 and B5).