Jet jdp-15m ユーザーガイド

 

9

 

Referring to Figure 5: 

Thread the column lock handle (D) into the table 
bracket (E). 

 

 

Referring to Figure 6: 

1. Place 

the 

table (A) on the bracket (B). 

2. Tighten 

the 

table lock handle (C). 

 

 

 

Referring to Figure 7: 

1.  With the aid of a second person, carefully lift 

the  head onto the column top and slide it 
down into position 

 

2.  Rotate head assembly until sides of the 

pulley cover are parallel with the sides of the 
base. 

3.  Tighten two setscrews (A) with a 5mm hex 

wrench (provided) until they are snug. 

 

4. Install three downfeed handles (B) into the 

downfeed hub (C). 

Referring to Figure 8: 

1.  Twist the chuck (B) to retract the chuck jaws 

if they are exposed. 

2.  Install the chuck (B) to the arbor (A) tightly. 

3.  Insert the chuck and arbor assembly into the 

spindle (C). Pull the downfeed handle down 
to press the arbor in place. 

Note: Put a piece of scrap wood (D) on the table 
to protect the chuck nose when pulling the 
downfeed handle (E) down to press into place.