Jet jj-8cs ユーザーズマニュアル

7

Note: unit shipped in two cartons.

Stand Carton
1.

Stand with Motor

1.

Stand Door

1.

Dust Chute w/ Mounting Hardware

Main Unit Carton
1.

Bed Assembly w/ Fence

1.

Cutter Guard

3.

Mounting Bolts

3.

3/8" Lock Washers

1.

Belt Guard

3.

Hex Wrenches (3, 4 & 5mm)

2.

Handwheels

2.

Handles

2.

V-Belts

1.

Can of Touch-Up Paint

1.

8/10mm Open End Wrench

1.

12/14mm Open End Wrench

1.

Owner’s Manual

1.

Knife Gauge Assembly

1.

Warranty Card

#1 Cross Point Screw Driver
6-8" Adjustable Wrench or 17 and 19mm Wrench

1.

Carefully remove all contents from both shipping
cartons.  Compare contents of the shipping car-
tons with the list of contents above.  Place parts
on a protected surface.

2.

Report any shipping damage to your local dis-
tributor.

3.

Clean all rust protected surfaces (bed, fence, etc.)
with kerosene or diesel oil. Do not use gasoline,
paint thinner, mineral spirits, etc.  These may
damage painted surfaces.

 

4.

Apply a thin layer of paste wax to the bright sur-
faces of the fence and tables to prevent rust.

5.

Set packing material and shipping cartons to the
side.  Do not discard until machine has been set
up and is running properly.