Maytag mgr8670w ユーザーズマニュアル

To avoid damage to the control panel, do not use abrasive 
cleaners, steel-wool pads, gritty washcloths or abrasive paper 
towels.

■

Glass cleaner and soft cloth or sponge: 
Apply glass cleaner to soft cloth or sponge, not directly on 
panel.

■

All-Purpose Appliance Cleaner Part Number 31682B (not 
included):
See cover for contact information.

■

Steel-wool pad

■

For racks that have discolored and are harder to slide, a light 
coating of vegetable oil applied to the rack guides will help 
them slide.

Check that storage drawer is cool and empty before cleaning.
Cleaning Method:

■

Mild detergent

The oven light is a standard 40-watt appliance bulb. Before 
replacing, make sure the oven and cooktop are cool and the 
control knobs are in the off position.

1. Unplug range or disconnect power.

2. Turn the glass bulb cover in the back of the oven 

counterclockwise to remove.

3. Turn bulb counterclockwise to remove from socket.
4. Replace bulb, then bulb cover by turning clockwise.
5. Plug in range or reconnect power.

■

Is the power supply cord unplugged?
Plug into a grounded 3 prong outlet.

■

Household fuse blown or circuit breaker tripped?
Replace the fuse or reset the circuit breaker. If the problem 
continues, call an electrician.

■

Is the main or regulator gas shutoff valve in the off 
position?
See Installation Instructions.

■

Is the range properly connected to the gas supply?
Contact a trained repair specialist or see Installation 
Instructions.

■

Is the oven in self-clean?
Surface burners will not operate during self-clean cycle.

■

Is the control knob set correctly?
Push in knob before turning to a setting.

■

Is this the first time the surface burners have been used?    
Turn on any one of the surface burner knobs to release air from 
the gas lines.

■

Are the burner ports clogged?
See “Sealed Surface Burners” section.

■

Are the burner ports clogged? 
See “Sealed Surface Burners” section.

■

On models with caps, are the burner caps positioned 
properly?
See “Sealed Surface Burners” section.

■

Is propane gas being used?
The range may have been converted improperly. Contact a 
service technician or see cover for contact information.

■

Is the burner wet?
Let it dry.

Noises that may be heard during the Bake and Broil operations:
Whooshing, Poof, Clicking, Snaps, Pop
These sounds are normal operational noises that can be heard 
each time the Bake or Broil burners ignite during the cycle.

■

A pop can be heard when the gas valve is opening or cycling 
on and will make a single pop when it snaps open from the 
solenoid. It sounds similar to a suction cup being pulled off of a 
piece of glass.