Electrolux EW30ES65GS インストール手順

3

The counter-top around the cut-out should be flat and
leveled (see hatched area on illustration 1).

Before installing the unit, measure the heights of the two (2)
cabinet sides (H1-4), front and back (see illustration 1) from the
floor to the top of the counter.

H1

H2

H3

H4

Illustration 1

Shave
Raised
Edge
to Clear
Space for a

1 ½" Max.

(3.8 cm Max.)

31½" (81 cm) Wide
Cooktop.

Remove the protective channels on each side of the glass
cooktop (if provided).

Slide the unit into the cabinet. Make sure the center of the unit is
aligned with the center of the cabinet cut-out.

Illustration 2

To successfully install
the range, the initial
level height from
floor to underside of
cooktop frame
should be at least  1/
16" taller than
cabinet sides as
measured in step 1.

Level the range using the
four (4) leveling legs  so
that the height from the
floor to the underside of
the metal flange is
greater than the tallest
cabinet measurement by
at least 1/16" (see
illustration 2).

After the installation, MAKE SURE that the
unit is supported by the leveling legs NOT by
the cooktop.

Metal

Flange

The metal flange under each side of the cooktop MUST be
placed over the cabinet countertop for proper unit support.
The cooktop should NOT directly touch the countertop (see
illustration 2) or could cause glass breakage voiding the war-
ranty.  Level the unit if needed.