Electrolux ew36ec55g ユーザーズマニュアル
13
Setting Surface Controls
OPERATING THE SINGLE SURFACE RADIANT
ELEMENTS
ELEMENTS
!
CA
CA
CA
CA
CAUTION
UTION
UTION
UTION
UTION
Radiant surface elements may appear to have cooled after they have been turned OFF. The Hot Surface
Indicator Light will turn ON and will continue to glow until the glass cooktop has cooled down to a
moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched
before the indicator light has turned OFF.
Indicator Light will turn ON and will continue to glow until the glass cooktop has cooled down to a
moderate level. The glass surface may still be hot and burns may occur if the glass surface is touched
before the indicator light has turned OFF.
Do not place plastic items such as salt and pepper shakers, spoon holders or plastic wrappings on
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons
could catch fire if placed too close to the surface elements.
top of the range when it is in use. These items could melt or ignite. Potholders, towels or wooden spoons
could catch fire if placed too close to the surface elements.
The cooktop has single radiant surface elements at 2 locations; the right and
left rear (Figs. 1 & 2) element positions.
left rear (Figs. 1 & 2) element positions.
To Operate the Single Surface Element
1.
Place correctly sized cookware on the radiant surface element.
2.
Touch and hold the
POWER
key pad until a beep sound. The power indicator
light above the
POWER
will turn ON. Note: If no other key pad is touched within
lock
POWER
warm
size
ON OFF
ON OFF
hot surface
med
hot surface
med
timer
ON OFF
size
hot surface
med
ON OFF
hot surface
med
lock
POWER
timer
warm
size
ON OFF
ON OFF
ON OFF
ON OFF
size
ON OFF
size
hot surface
med
hot surface
med
hot surface
med
hot surface
med
hot surface
med
20 seconds the request to Power ON the cooktop will clear.
3.
Touch and hold the
ON OFF
pad for the desired element position until a
beep is heard. The indicator light located above the
ON OFF
pad will glow.
Note: If no further pads are touched within 10 seconds the
request to power the element ON will clear.
request to power the element ON will clear.
4.
Touch
pad once to turn ON the power level to HI. Touch
med
pad once for MEDIUM, touch
pad once for power level
to LO or touch
warm
pad once to set the power level to KEEP
WARM setting.
5.
Each touch of the
or
pad will increase or decrease the
Fig. 1
Fig. 2
power level. Lo is the lowest power level available. Note: The power level may be
adjusted at any time while the element is ON.
adjusted at any time while the element is ON.
6.
When cooking has been completed touch the
ON OFF
pad once to turn the element OFF
and if no other surface element is used touch the
POWER
key pad to turn off the cooktop.
Each surface element provides a constant amount of heat at each setting. A glowing
red surface heating area extending beyond the bottom edge of the cookware indicates
the cookware is too small for the surface heating area.
Note: The Hot Surface Indicator Light will turn ON if the cooktop is still hot and will
remain ON until the heating surface area has cooled sufficiently.
red surface heating area extending beyond the bottom edge of the cookware indicates
the cookware is too small for the surface heating area.
Note: The Hot Surface Indicator Light will turn ON if the cooktop is still hot and will
remain ON until the heating surface area has cooled sufficiently.