Electrolux e32ar75jp オーナーマニュアル

ページ / 22
6
This Use & Care Guide provides general installation 
and operating instructions for your model.   We 
recommend using a service or kitchen contracting 
professional to install your refrigerator.   Use the 
refrigerator only as instructed in this Use & Care 
Guide.  Before starting the refrigerator, follow 
these important fi rst steps.
Location
• 
Choose a place that is near a grounded, non-
GFCI, electrical outlet.  Do Not use an extension 
cord or an adapter plug.
• 
If possible, place the refrigerator out of direct 
sunlight and away from the range, dishwasher, or 
other heat sources.
• 
The refrigerator must be installed on a fl oor that is 
level and strong enough to support a fully loaded 
refrigerator. 
Installation
• 
Allow the following clearances for ease of 
installation, proper air circulation, and plumbing 
and electrical connections:
 
Sides    
3/8” inch (9.5 mm) 
 
Top and Back  1 inch (25.4 mm)
• 
Allow for trim kit if it to be installed with the unit.
 
 
Installation
Required Tools
You will need the following tools:
DO NOT install the refrigerator where the 
temperature will drop below 40°F (13°C) or rise 
above 110°F (43°C).  The compressor will not be 
able to maintain proper temperatures inside the 
refrigerator.
DO NOT block the toe grille on the lower front 
of your refrigerator.  Suffi cient air circulation 
is essential for the proper operation of your 
refrigerator.
The refrigerator doors are designed to shut by 
themselves within a 20 degree opening.
If your refrigerator is placed with the door hinge 
against a wall, you may have to allow additional 
space so the door can be opened wider.
Refrigerator
3/8”
(10mm)