Aethra d2000 lite ユーザーズマニュアル
USER’S MANUAL ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
2.2. Choosing an Automatic Test
The first step to make an automatic test is to select the access type and instrument
mode:
mode:
1
Open the TEST MENU.
The last used setup appears on the screen.
2
Select the ACCESS MODE field.
3
Choose PRIMARY RATE or BASIC RATE.
4
Select ACT AS.
5
Choose the instrument mode, i.e. TE-S.
The lower section of the screen shows the selected
network configuration. The yellow LED that corresponds to
the selected mode goes on. You can choose the
instruments modes listed in Table 2-1.
network configuration. The yellow LED that corresponds to
the selected mode goes on. You can choose the
instruments modes listed in Table 2-1.
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST
25