Aethra d2000 lite ユーザーズマニュアル
USER’S MANUAL ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000
If this automatic test reports problems, e.g. unavailable services
or profiles, it’s recommended to perform a specific manual tests
or profiles, it’s recommended to perform a specific manual tests
2.3.1. Setting Up an Automatic Test
Define the following parameters for an automatic test:
Called number: Enter the phone number of the called party.
• Remote number for calls to a remote user.
• Local number for autocalls.
• Local number for autocalls.
Pause between calls: Enter the number of seconds for the pause between two calls.
In some cases a pause ranging from 2 to 8 seconds is necessary to obtain correct
results.
In some cases a pause ranging from 2 to 8 seconds is necessary to obtain correct
results.
2.3.2. Running an automatic access test
When you have defined the setup for the automatic test, continue as follows:
1
Select ‘Use this setup for testing’ in the first SETUP page.
2
Connect the instrument as displayed on the screen and
press the right cursor key.
press the right cursor key.
3
Start the automatic test. The test results appear on the
screen.
screen.
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST
27