Aethra d2000 lite ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
Number of bursts: Set the total duration of the test expressed with the number of
bursts.
bursts.
Pause between burst: Set the time interval between two bursts of calls.
Parallel calls per burst: Set the maximum number of parallel calls for each group of
calls.
calls.
Single call duration: Set the minimum duration of the single call.
Pause between calls: Set the pause between the calls in a group.
Test traffic on: Select the type of traffic to be tested. The instrument can test the call
on one of the following parameters:
on one of the following parameters:
• Delivery, the call succeeds and ends when the ALERTING message has
been detected.
• Connection, the call succeeds and ends when the CONNECT message has
been detected. The call remains active for the set duration.
3.6.2. Running a Generate Traffic test
When you have defined the setup for the Generate Traffic test, continue as follows:
1
Select ‘Use this setup for testing’ in the first SETUP page.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the Generate Traffic test.
The LED RUN goes on and the test results appear on the screen.
The status line indicates the status of the test.
62
CHAPTER 3 - PERFORMING A MANUAL TEST