Aethra d2000 lite ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
By setting the < Immediate, with connection.> value in the <Call-
back> field and performing a BER test in autocall, § 0, the
measurement will be simultaneously made on NB channels,
where N is equal to <2 + 2 * <Maximum number of call-back>.
back> field and performing a BER test in autocall, § 0, the
measurement will be simultaneously made on NB channels,
where N is equal to <2 + 2 * <Maximum number of call-back>.
3.8.3. Running a Loop Box Test
When you have defined the setup for the Loop Box function, the function is and
remains active in background with immediate operation. For information on the status
of the B channels, see chapter 7, SMART STATUS.
remains active in background with immediate operation. For information on the status
of the B channels, see chapter 7, SMART STATUS.
The loopbox function will automatically answer to incoming calls according to the
diagram contained in Appendix C.
diagram contained in Appendix C.
3.9. Testing the X.25 on the D channel
Use an X.25 ON THE D CHANNEL test to verify the operation of the X.25 service
and the throughput on reception and transmission side of the ISDN line.
and the throughput on reception and transmission side of the ISDN line.
3.9.1. Setting Up an X.25 on D Channel Test
Define the following parameters for an X.25 on D Channel test:
68
CHAPTER 3 - PERFORMING A MANUAL TEST