Aethra d2000 lite ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2000
PRO
/D2000Lite/D2000 USER’S MANUAL
TEI: Use the TEI value assigned to the access. X.25 service uses a fixed value of
TEI.
TEI.
LCI: Logical Channel Identifier, which must be set at one of the values of the LCI
range used by the access. The instruments uses this value for outgoing calls, while
accepting any LCI value for incoming calls.
range used by the access. The instruments uses this value for outgoing calls, while
accepting any LCI value for incoming calls.
Window layer 3: Number of level 3 packets which can be transmitted without waiting
for a reply ("3" by default).
for a reply ("3" by default).
When you have defined the setup for the X.25 on D Channel test, continue as
follows:
follows:
3.9.2. Running an X.25 on D Channel Test
1
Select ‘Use this setup for testing’.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the X.25 test on the D channel.
The LED RUN goes on and the test results appear on the screen.
70
CHAPTER 3 - PERFORMING A MANUAL TEST