Aethra d2061 ユーザーズマニュアル

ADSL TESTER D2061 

                                                                                        USER’S MANUAL 

 

Duration: Choose the duration of the test from the predefined list or define your own 
duration.  

Measurement cycles: Set the number of tests the instrument has to do on the 
network. Is only active in Outgoing 64k/56K mode. Set together with the pause 
between cycles.  

Pause between cycles: Set the pause between two tests in seconds. Set together 
with the measurement cycles.   

When you have defined the setup for the BER test, continue as follows: 

Select ‘Use this setup for testing’ in the first SETUP: BER 
page. 

Connect the instrument as displayed on the screen and 
press the RIGHT CURSOR key.  

Start the BER test. 

The RUN LED turns on and the test results appear on the screen.  

 

62

 

CHAPTER 3 - PERFORMING A MANUAL TEST