Aethra d2061 ユーザーズマニュアル
ADSL TESTER D2061
USER’S MANUAL
5.2. Setting up for monitoring
The following example describes the setup for ADSL monitoring.
D2061 performs the background monitor during the ATU R
simulation and can save all the modem events.
simulation and can save all the modem events.
Differences to other monitoring modes will be indicated throughout the text.
1
Open the TEST MENU.
The last used setup appears on the screen.
The last used setup appears on the screen.
2
Select the right procedure you want to apply (for ADSL,
ISDN or POTS).
ISDN or POTS).
The screen changes whenever an ACT AS is chosen..
3
Select MANUAL TESTS and open the manual tests menu.
4
Select SETUP & START MONITOR and open the
SETUP: MONITOR.
SETUP: MONITOR.
In case of ISDN or POTS access mode, use the functions in this screen to remove
superfluous messages from the monitored traffic. These messages will no longer be
available during analysis.
superfluous messages from the monitored traffic. These messages will no longer be
available during analysis.
74
CHAPTER 5 - USING THE DEVICE FOR MONITORING