Aethra d2061 ユーザーズマニュアル
USER’S MANUAL
ADSL TESTER D2061
ISDN
POTS
Capture layer: Choose the layer to be captured in the monitor test.
Capture TEI: Capture specific TEI numbers. You can also use this filter to define one
single TEI that needs to be monitored.
single TEI that needs to be monitored.
Capture SAPI: Capture messages with specific SAPI values.
Capture Msg
⇒ TE: Capture specific messages that are sent to the TE.
Capture Msg
⇒ NT: Capture specific messages that are sent to the network.
Buffer Mode: Choose whether monitoring should stop when the trace buffer is full or
older data should be overwritten.
older data should be overwritten.
5.3. Start monitoring
When you have set the filters, you can start the monitoring test.
Select “Use this setup for monitoring”, connect the instrument as indicated and start
monitoring.
monitoring.
1
Start monitoring.
If the previous trace has not been saved, the device asks for a
confirmation to start a new capture session overwriting the data
previously stored.
confirmation to start a new capture session overwriting the data
previously stored.
CHAPTER 5 - USING THE DEVICE FOR MONITORING
75