Aethra d2001 nx ユーザーズマニュアル
USER’S MANUAL
ISDN TESTER AND ANALYZER D2001
NX
If the service is available, the device displays the two numbers of the access
preceded by the symbol ‘arrow’ indicating the direction of the call. Usually the calling
number, provided by the network, is the basic number of the access. The result of
this test depends on the network configuration.
preceded by the symbol ‘arrow’ indicating the direction of the call. Usually the calling
number, provided by the network, is the basic number of the access. The result of
this test depends on the network configuration.
Page 4 shows the B channels available at the local access for outgoing calls.
Generally the "--" symbol indicates that the profile, service or B channel has not been
verified yet. “OK” appears in the column when the profile or B channel is accepted. If
the service or the B channel is not available, the cause is shown using a code
number (cause code). Use the right arrow key to display information on the cause
codes on pages 5 and 6.
verified yet. “OK” appears in the column when the profile or B channel is accepted. If
the service or the B channel is not available, the cause is shown using a code
number (cause code). Use the right arrow key to display information on the cause
codes on pages 5 and 6.
You can save and/or print the test results at the end of the test. See Chapter 9 for
more information about saving and printing.
more information about saving and printing.
2.4. Performing an X.25 access test
Use this test to verify if and which link (TEI) supports the X.25 service (SAPI 16). A
further test may be performed in order to control the availability of the LCI given to
the access.
further test may be performed in order to control the availability of the LCI given to
the access.
CHAPTER 2 - PERFORMING AN AUTOMATIC TEST
29