Aethra d2001 nx ユーザーズマニュアル
ISDN TESTER AND ANALYZER D2001
NX
USER’S MANUAL
To perform the test on POTS line, you need to use the optional
AB2001N adapter.
AB2001N adapter.
See Appendix A for information on connections.
3.4.1. Setting up a call test
Define the following parameters for a call test:
Called number: Enter the phone number of the called party.
• Remote number for calls to a remote user.
• Local number for autocalls.
• Local number for autocalls.
To add the SENDING COMPLETE information element, enter '#'
at the end of the number. ISDN only.
at the end of the number. ISDN only.
Sub number: If necessary, enter the subaddress of the called party. ISDN Only.
3.4.2. Running a call test
When you have defined the setup for the call test, continue as follows:
1
Select ‘Use this setup for testing’ in the first SETUP page.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the CALL test.
40
CHAPTER 3 - PERFORMING A MANUAL TEST