Aethra d2001 nx ユーザーズマニュアル
USER’S MANUAL
ISDN TESTER AND ANALYZER D2001
NX
Answer: If the Callback is set at “None”, it is possible to choose the answer mode
between:
between:
• Automatic, the device answers automatically to the incoming call
• Manual, when an incoming call is received, the device makes a warning
• Manual, when an incoming call is received, the device makes a warning
tone, the “bell” item appears on the upper part of the screen and the user
can decide if answer or not. (see chapter 6)
can decide if answer or not. (see chapter 6)
Wait time: Waiting time between the remote disconnection and the call-back call.
Duration: Maximum duration of the outgoing call-back call.
Escape#: The digits entered in this field will be dialed before the called number if the
incoming call CGN is of National or International type. The dialled number will be
made up of <Escape# + CGN>.
incoming call CGN is of National or International type. The dialled number will be
made up of <Escape# + CGN>.
3.8.2. Running a loop box test
When you have defined the setup for the Loop Box test, the test is and remains
active in background with immediate operation. For information on the status of the B
channels, see Chapter 6 SMART STATUS.
active in background with immediate operation. For information on the status of the B
channels, see Chapter 6 SMART STATUS.
3.9. Testing the X.25 on the D channel
Use the X.25 ON D-CHANNEL test to check the operation of the X.25 service and
the throughput on the reception and transmission side of the ISDN line.
the throughput on the reception and transmission side of the ISDN line.
3.9.1. Setting up an X.25 on D channel test
Define the following parameters for an X.25 on D Channel test:
CHAPTER 3 - PERFORMING A MANUAL TEST
59