Aethra d2001 nx ユーザーズマニュアル
USER’S MANUAL
ISDN TESTER AND ANALYZER D2001
NX
TEI: Use the TEI value assigned to the access. X.25 service uses a fixed value of
TEI.
TEI.
LCI: Logical Channel Identifier, which must be set at one of the values of the LCI
range used by the access. The instruments uses this value for outgoing calls, while
accepting any LCI value for incoming calls.
range used by the access. The instruments uses this value for outgoing calls, while
accepting any LCI value for incoming calls.
The instrument only manages one incoming LCI value at a time.
3.9.2. Running an X.25 on D channel test
When you have defined the setup for the X.25 on D Channel test, continue as
follows:
follows:
1
Select ‘Use this setup for testing’.
2
Connect the instrument as displayed on the screen and
press the RIGHT CURSOR key.
press the RIGHT CURSOR key.
3
Start the X.25 test on the D channel.
Note that:
The START key changes to STOP. Use this key to end the test.
The test results appear on the screen.
CHAPTER 3 - PERFORMING A MANUAL TEST
61