Videoseven nav700 ユーザーガイド

   

 

01) Please pull the right sided main 
power switch (7) in position “ON”   

02) Connect the device to external 
power-supply (11) (e.g. car charger) in order 
to fully charge the integrated battery (status 
LED at front side of the device will change to 
GREEN). 
   

03) Insert the memory card (1) (with label up 
sided and contact in front) until the card is 
locked in place. Avoid any dirt or scratches on 
the contacts of the memory card. Then press 
the power button (3) in the front of the device. 

04) Connect you device to the cradle.   

04) Connect your device to the car mount by 
slipping the 4-prongs of the car-mount to the 
4-holes on the back of the device. Push the 
mount up until you will hear a “CLICK” and 
the prongs are tightened connected to the 
device. 

06) Press the holder against a flat part of your 
windscreen/Flat Platform and press the lever 
down to create a vacuum at the suction cup. 
Be aware that the windscreen must be free of 
any dirt.   

07) Afterwards the holder is hold tightly 
at your windscreen/Flat Platform now.   
 

08) To release the holder, just push the lever 
upwards...  

09) ... and also pull the flap upwards to 
destroy the vacuum under the suction cup.