Videoseven nav700 ユーザーガイド
7. Reset the device
There are 2 possible ways to reset the device.
• Softreset: This will not delete any data on your device. Only be necessary if the device is not reacting
properly or crashed down. Will be done by using a spiky item in the right-sided reset hole (8).
•
Hardreset: This reset is like a factory-reset and will erase all data on the device (except folder “My
Flashdisk”) and user has to make all installation from the beginning. Simply disconnect all external
power supplies and switch the main-power switch (7) on the right-sided of the device to position OFF.
After 5 seconds switch it again to ON and factory-reset will be finished. Please note: By doing this
action, NAV700 will return to its default setting. All of your previous settings will lose.
Flashdisk”) and user has to make all installation from the beginning. Simply disconnect all external
power supplies and switch the main-power switch (7) on the right-sided of the device to position OFF.
After 5 seconds switch it again to ON and factory-reset will be finished. Please note: By doing this
action, NAV700 will return to its default setting. All of your previous settings will lose.
8. Data Recovery
In case of any data corruption in NAV700 that requires data recovery, please connect your NAV700 to PC or
Notebook via mini USB cable. When mini USB cable is connected, a “TFAT” drive will appear. Insert Backup
DVD and select “Recovery Application” and simply copy all files under this directory to “TFAT” drive to
recover the corruption files.
9. Trouble shooting
Q: Device does not react in any way.
A: Please check if the battery runs low and recharge it.
Q: Display is frozen and it does not react.
A: Please make a soft reset of the device and start the navigation again.
Q: Application is not working.
A: Please check if the application is installed properly. If not, make a hard reset and re-install the application.
Re-install procedures please follow the instruction on 8.Data Recovery
Q: I always got the message “Please insert memory card”
A: There is no memory card inserted, data on the memory card is erased or card is not compatible. Please
check the data on the card and eventually re-format the card (FAT or FAT16) and copy all essential data
again to the card. If it is still not working maybe the card is not compatible.
Q: Memory card is erased. How can I restore all data?
A: Please take the Backup DVD (in the package) and copy all essential data again by using a card-reader.
Q: Where can I get additional maps?
A: Additional maps can be purchased at your dealer or (if purchased) on the included Backup DVD.
Q: Where can I get more information about the system or additional accessory?
A: For more information of the system or about available accessory please contact your dealer or visit
us under
A: Please check if the battery runs low and recharge it.
Q: Display is frozen and it does not react.
A: Please make a soft reset of the device and start the navigation again.
Q: Application is not working.
A: Please check if the application is installed properly. If not, make a hard reset and re-install the application.
Re-install procedures please follow the instruction on 8.Data Recovery
Q: I always got the message “Please insert memory card”
A: There is no memory card inserted, data on the memory card is erased or card is not compatible. Please
check the data on the card and eventually re-format the card (FAT or FAT16) and copy all essential data
again to the card. If it is still not working maybe the card is not compatible.
Q: Memory card is erased. How can I restore all data?
A: Please take the Backup DVD (in the package) and copy all essential data again by using a card-reader.
Q: Where can I get additional maps?
A: Additional maps can be purchased at your dealer or (if purchased) on the included Backup DVD.
Q: Where can I get more information about the system or additional accessory?
A: For more information of the system or about available accessory please contact your dealer or visit
us under
.