Cool-Icam cic-175 ユーザーズマニュアル

4

The Shutter Button has 5 functions.  Although these are covered in more detail later in this manual, please nd below a brief 

description.

To take an image, aim the Pocket C@m by looking through the viewnder and press the Shutter Button once.  A beep means 

you have taken an image. (see section 6)

To take a movie clip, press and hold the Shutter Button to start taking continuous images when in the Continuous 

 

Mode. (see section 6)

To start the 10 second Self-Timer, simply press the Shutter Button when the Pocket C@m is in the Self-Timer 

 Mode. 

(see section 6)

To clear all images that you have taken, simply press the Shutter Button when you are in the Clear 

 mode. (see section 

6)

The Shutter Button can be used to switch between Hi-Res and Low-Res settings.  To do this, the memory must rst be cleared, 

and the resolution option selected. (see section 6)

The viewnder is the window you look through when you aim the Pocket C@m. Make sure you center the subject in the 

viewnder before taking an image.

By default, the 2 digit LCD screen displays the number of images remaining that can be taken before the Pocket C@m’s 

memory is lled.  It is also used in conjunction with the Mode Button to access and display the Pocket C@m settings.

 

Images Remaining

Clear Memory Mode

Self-Timer Mode

Low Resolution (Low-Res) Mode

High Resolution (Hi-Res) Mode

Continuous Mode

Low Battery Warning 

(LCD will blink)

The Mode Button has 2 primary functions:

When your Pocket C@m is in Stand-by Mode, press the Mode button to reactivate.

You can also use the Mode Button to cycle through the operating modes of your Pocket C@m.  (For more details, see 
section 6 Getting Started)

 

To avoid lost images when change/install batteries, please make sure your images are uploaded to your PC or Mac before changing batteries.  Or 

 

make sure the Pocket C@m is connected to your PC or Mac via the USB cable with your PC or Mac is switched on.

1.  Press  and  push  the  battery  door  downward  (as  shown  on  the  diagram  below).  Insert  the  2  fresh  AAA  alkaline  batteries  into  the  battery 

 

compartment.  (Make sure you follow the correct polarity (+) (-) as indicated.)

2.  Push the battery door upwards to close the battery door.

 

Press and push 

downward to open

push upward to 

close