Cool-Icam cic-175 ユーザーズマニュアル
5
5.6 USB Cable Port
The USB cable allows you to upload images from the Pocket C@m to your PC or Mac. One end of the cable connects to the
USB port on the side of the Pocket C@m and the other end connects to your PC’s or Mac’s USB port. When your Pocket
C@m is connected to your PC or Mac, it will draw power from the PC in order to preserve your battery life.
The USB port can be found on the front or back panel of your PC or Mac. Look for this symbol next to the connection port.
(Also see your PC or Mac operating manual for the location of your USB connection port.)
(Also see your PC or Mac operating manual for the location of your USB connection port.)
USB Series “A” Plug
connects to your PC or Mac
USB Series “B” Plug connects
to your Pocket C@m
5.7 Pocket C@m Cilp
When you want to use your Pocket C@m as a web-cam (for PC Users only), fold your Pocket C@m to a position suitably.
Or you can clip your Pocket C@m on your notebook computer use the enclosed notebook clip and position it on the top of
your notebook.
Place the Pocket C@m on
top of your monitor.
Attach the clip to your
Pocket C@m
Attach your Pocket
C@m to your
notebook computer
Pull
Adjust your Pocket
C@m to any suitble
angle
Adjust angle
Important Notes:
To use as a web-cam, you will require Internet access. To talk and listen, you will require a sound card, speakers and microphone (not
supplied).
5.8 Power
5.8.1 Stand-by Mode
After a period of 30 seconds inactivity, the Pocket C@m will switch to Stand-by Mode automatically and the LCD will go blank.
All images taken will not be lost as they are stored in the Pocket C@m’s memory.
Important Notes:
It is important to note that any images stored in your Pocket C@m’s memory will be lost if the battery is totally drained or removed (and the USB
cable is not connected to your Pocket C@m to your powered on PC or Mac). Please make sure your wanted images are uploaded to your PC or
Mac via the USB cable before changing or installing batteries.
5.8.2 Low Battery
If the LCD display begins to blink
or is displayed, these are warnings that there is not enough power left in your
battery to fully operate your Pocket C@m.
Important Notes:
You must upload any stored images within 6 hours. Do not replace your battery before you have downloaded or saved your images to your PC
or Mac.