DataCard SD260 ユーザーガイド

 

90

Using the Printer

•  Change the cleaning sleeve each time you clean the printer or change the print 

ribbon.

•  You can also clean the printhead. See 

 

for the steps to 

follow.

Clean the printhead

Clean the printhead when you notice unprinted lines on the finished card. This 
usually indicates dirt or contamination on the printhead. Clean the printhead 
after replacement or if it has been accidently touched. The oils from hands could 
affect print quality. 

1. 

Begin with the printer powered off.

2. 

Open the printer cover and remove the print ribbon cartridge.

3. 

Open the cleaning pen. 

4. 

Using gentle pressure, move the cleaning pen 
back and forth along the full length of the 
printhead edge until it is completely clean.

5. 

Replace the print ribbon cartridge and close the 
printer cover. Avoid bumping printhead when 
installing the print ribbon cartridge.

6. 

Power on the printer.

7. 

Print a sample card to verify the quality of printing.