DataCard SD260 ユーザーガイド

127

 

Network Installation Troubleshooting 

The cable is loose.

Reconnect the data cable to the network port and 

the printer. Restart the printer.

The Status page of 

Printer Properties shows 

the printer is not 

available, but the 

printer shows “Ready” 

on the LCD panel.

Follow your network troubleshooting procedures to 

isolate and test each component of the computer-

to-printer communication link.
Suggestions:

The computer-to-network connection can be 

checked by accessing a network resource, such 

as a network drive. 

The network administrator can check 

communication between a server and the 

printer. 

Make sure the user is logged in to the network.

The printer is not 

configured with the 

correct network 

address

Make sure that the server name or IP address has 

been entered in the Port Settings or Configure Port 

dialog box on the computer. See

 for the steps to follow.

Check that “Ready” is displayed on the printer's LCD 

panel.

Driver Problems

The driver and printer can have the following communication problems: