Citizen bl5380-58e ユーザーガイド
56
57
English
Notes on Using Eco-Drive Watch
WARNING
Handling the rechargeable cell
Do not remove the rechargeable cell from the watch yourself. This is a specialized cell with contacts
•
that must be placed correctly to the movement for correct operation.
If you must remove the rechargeable cell, store it out of reach of children to avoid accidental
If you must remove the rechargeable cell, store it out of reach of children to avoid accidental
•
ingestion. If the rechargeable cell is ingested, consult a doctor immediately.
CAUTION
Charging precautions
Do not charge the watch in a high-temperature environment (about 60°C / 140 F° or more).
•
Overheating while charging can cause the watch exterior to become discolore. Additionally the watch,
the movement and other vital components may become deformed or damaged rendering them
unusable.
the movement and other vital components may become deformed or damaged rendering them
unusable.
Example:
Charging close to incandescent lighting, halogen lamps, or other lighting sources that easily become
•
hot enough to melt certain components on the interior of the watch.
Charging on surfaces that can easily become hot, such as a car dashboard.
Charging on surfaces that can easily become hot, such as a car dashboard.
•
Before executing the all-reset, first check that the watch is fully charged and that the
second hand is moving in 1-second intervals.
If the all-reset is executed while the watch is insufficiently charged, subsequent
operations will become impossible and the watch will completely stop.
second hand is moving in 1-second intervals.
If the all-reset is executed while the watch is insufficiently charged, subsequent
operations will become impossible and the watch will completely stop.
Rotate the crown while in position 1 to align the mode hand with chronograph [CHR]
1.
mode.
Pull the crown out two steps to position 2 (reference or 0-position correction mode).
Pull the crown out two steps to position 2 (reference or 0-position correction mode).
2.
Each hand and the date will move to their recorded reference or 0-positions and then
•
stop.
Simultaneously press and hold both the upper and lower right buttons (A) and (B) for
3.
approximately 2 seconds, then release.
A confirmation sound will be emitted, and then a hand movement demonstration
•
will be performed in order of second hand, hour hand/minute hand/24-hour hand,
and function hand/date to indicate that the all-reset has completed.
and function hand/date to indicate that the all-reset has completed.
Note:
After the all-reset, always correct the reference or 0-positions for each hand.
Then correctly adjust each mode before using the watch.
After the all-reset, always correct the reference or 0-positions for each hand.
Then correctly adjust each mode before using the watch.