Canon MF4690 参照マニュアル
1
2
3
4
5
6
7
8
9
10
11
Back
Next
Previous
TOP
6-14
Before Using the
Machine
Machine
Document and Paper
Copying
Sending and
Receiving
Receiving
Printing and
Scanning
Scanning
Network
Remote UI
System Manager
Settings
Settings
Maintenance
Troubleshooting
Appendix
Index
Table of Contents
8.
Click
[Finish].
If the dialog box displays [Additional Port Information Required],
follow the instructions on the screen to search again, or click
[Standard] → click [Canon Network Printing Device with P9100] from
the pull-down list → click [Next].
follow the instructions on the screen to search again, or click
[Standard] → click [Canon Network Printing Device with P9100] from
the pull-down list → click [Next].
9.
Click [Close] to close the [Printer Ports] dialog
box.
10.
In the printer properties dialog box, click
[Configure Port] → Click [LPR] under [Protocol]
→ enter a print queue in [Queue Name] under
[LPR Settings].
→ enter a print queue in [Queue Name] under
[LPR Settings].
If you want to use Raw, confirm [Raw] under [Protocol] is selected,
and proceed to step 11.
and proceed to step 11.
You can specify a print queue in [Queue Name]. The following three
print queues are available:
LP: The machine prints according to its spool settings. Normally
select this option.
SPOOL: The machine prints only after spooling a print job on the
hard disk, regardless of its spool settings.
DIRECT: The machine prints without spooling a print job on the hard
disk, regardless of its spool settings.
print queues are available:
LP: The machine prints according to its spool settings. Normally
select this option.
SPOOL: The machine prints only after spooling a print job on the
hard disk, regardless of its spool settings.
DIRECT: The machine prints without spooling a print job on the hard
disk, regardless of its spool settings.
11.
Click [OK].
12.
Click [Close].