Canon MF4690 参照マニュアル

Back

Next

Previous

TOP

6-16

Before Using the
Machine

Document and Paper

Copying

Sending and
Receiving

Printing and
Scanning

Network

Remote UI

System Manager
Settings

Maintenance

Troubleshooting

Appendix

Index

Table of Contents

Setting Up E-Mail

This section describes procedures for setting up e-mail.
Before setting up e-mail, it is necessary to perform the
following setup procedures.

It is recommended that the network administrator perform the following
procedures.

Network Cable Connection (See “Set the

Machine for Network Usage,” in the Starter
Guide.)

Connect the machine to your network using the network cables.

Preparation for Protocol Settings (See “Set the

Machine for Network Usage,” in the Starter
Guide.)

Specify the machine’s IP address so that the machine and the
network computer can communicate before making protocol
settings. Any of the following can be used to specify the settings.

Machine’s operation panel (Additional Functions menu)
NetSpot Device Installer (Canon utility software included in the
User Software CD)

–
–

Basic Network Settings

Set up the basic network settings between the machine and
computers on your network. To specify the settings, use:

Machine’s operation panel
Web browser (Remote UI)

Settings from the Operation Panel

You may need to specify the DNS Settings to resolve the host names of
the SMTP and POP servers in order to send e-mail. For details, see “DNS
Settings,” on p. 6-35.

Press [Additional Functions].

Press

[

] or [

] to select <SYSTEM

SETTINGS>, then press [OK].

If the System Manager ID and System Password have been set, enter
the System Manager ID and System Password using the numeric
keys, then press [Log In/Out (ID)].

–
–

■