Ricoh fax3310l ユーザーガイド

8-1

Chapter 8

Operation and Troubleshooting

This chapter describes:

•

Normal operation of the Network Interface Board in the printer

•

LED status indicator

•

Status reports

•

Resetting the Print Server to factory defaults

•

Troubleshooting any problems you might have with the Network Interface Board

The Network Interface Board has two LED status indicators: orange and green. The 
orange LED generally indicates job activity. The green LED indicates the operating 
condition of the Network Interface Board.

•

When you first power on the printer, the green LED is on solid (that is, not 
blinking). This indicates that the Network Interface Board is performing self tests. 
The green LED may also be on solid when the printer is awaiting a print job and 
the Network Interface Board is functioning properly.

•

When the printer finishes the self-tests, the green LED blinks, and may blink 
again after initialization with the printer is completed. If the Print Status Report on 
Power up feature is enabled, the Network Interface Board generates a status 
report.

•

When the printer is receiving print jobs over the network, the orange LED blinks. 
It is off when there is no activity.

•

The orange LED is on solid (not blinking) to indicate that the network connection 
has been lost — typically, because the server has been shut down.