Electrovoice 205-4t パンフレット

12

30 watts

60 watts

32 watts

30 watts

260 HZ-10 kHz

280 Hz-8 kHz

330 Hz-4.2 kHz (±5 dB)

500 Hz-7 kHz (±5 dB) 350 Hz lower usable limit

1 kHz

1 kHz

N/A

—

105 dB SPL, 1 W, 1 m

105 dB SPL, 1 W, 1 m

107 dB SPL, 1 W

107 dB SPL, 1 W, 1 m

70.7 V transformer

70.7 V transformer

25 or 70.7 V Xfmr for -T models

8 ohms nominal

150° H x 110° V

150° H x 110° V

55° H x 74° V

60°

θ

7.4 @ 2 kHz

5.2 @ 2 kHz

16.3 @ 2 kHz

N/A

—

—

-26 dBm

-26 dBm (ref.: 10 dynes/cm

2

)

20.5 H x 10.5 W x 20.0 D

20.5 H x 10.5 W x 20.0 D

7.1 H x 14.4 W x 12.5 D

10.5 dia. x 9.0 deep

(52.0 H x 26.5 W x 51.0 D)

(52.0 H x 26.5 W x 51.0 D)

(18.1 H x 36.5 W x 31.8 D)

(26.0 dia. x 22.9 deep)

18 lb. (8.2 kg)

21 lb. (9.5 kg)

CFID 32-8: 6 lb. (2.7 kg)

4.5 lb. (2.0 kg)

CFID 32-T: 6.3 lb. (2.9 kg)

A 30-watt compound diffraction projector.Wide range, integrated horn-and-driver system.

Single driver is fitted to two coaxial horns, each coupled to opposite sides of the driver

diaphragm.Weather-resistant gray with 150° H x 110° V at 2 kHz. Compound diffraction

design allows for more uniform dispersion throughout the frequency range.The CDP-848AT

features a 30-watt 1828T driver, 260 Hz-10 kHz frequency response, uniform dispersion over

the frequency range and heavy-duty drivers with 25/70.7-volt transformers offering 0.5-, 1-,

2-, 4-, 8-, 15- and 30-watt taps.

The IBC8 is a 30-watt high-powered reentrant paging projector/talkback speaker. Designed for use in

adverse ambient conditions, the IBC8 is weather-resistant and appropriate for outdoor or indoor use.

Features 60° dispersion at 2 kHz, integral swivel mounting bracket, gray color and 8-ohm impedance.

This 32-watt paging projector is designed for high speech intelligibility under adverse ambient conditions.

Low distortion and smooth frequency response make the CFID32-T a good choice for background music

in indoor or outdoor applications. 55° H x 74° V at 2 kHz, 25/70.7-volt transformer with 1.25-, 2.5-, 5-,

10-, 15- and 32-watt taps. CFID32-T comes in weather-resistant gray and offers diffraction effect for wide

horizontal dispersion, 330 Hz-4.2 kHz frequency response, integral swivel bracket and weather-sealed

gland-nut connection.

A 60-watt compound diffraction projector.Wide range, integrated horn-and-driver system. Single 

driver is fitted to two coaxial horns, each coupled to opposite sides of the driver diaphragm.

Weather-resistant gray with 150° H x 110° V at 2 kHz. Compound diffraction design allows for more 

uniform dispersion throughout the frequency range.The CDP-850T features a 60-watt 1829BT driver,

280 Hz-8 kHz frequency response, uniform dispersion over the frequency range and heavy-duty drivers

with 25/70.7-volt transformer offering 8-, 15-, 30- and 60-watt taps.

A 25-watt submergence-proof design (U.S. Navy specification) with a serrated mounting

bracket allowing for a 90° arc swivel. Ideal for use near water or spray.The gray MM2 features an 

82° x 82° dispersion pattern and 16-ohm impedance. Each unit is fully protected against damage 

from high humidity, salt water and other environmental conditions.

Same as MM2 except with a flush mount designed for mounting on the front 

surface of bulkhead, wall or ceiling.

Same as MM2 except with a surface/bulkhead mount and watertight internal matching

transformer compartment. Requires University Sound 5030 transformer part no. 56-05-022109-04.

EVID

™

Systems

Hor

ns and Drivers

Paging Mics

Pr
oAnnounce

™

System Examples

Ceiling Speakers

Amplifiers

Surface Mount Speakers