Electrovoice 205-4t パンフレット
13
The MIS8C is a 10-watt paging/talkback projector with a compact design
for flush mounting on walls and cabinets. Ideally suited for paging and general
communication applications.The gray MIS8C features 100° dispersion and
8-ohm impedance.
for flush mounting on walls and cabinets. Ideally suited for paging and general
communication applications.The gray MIS8C features 100° dispersion and
8-ohm impedance.
This horn is designed to provide a dispersion pattern that is constant over a 2 kHz
to 10 kHz frequency range, reducing the number of horns needed to cover an area.
The tan, weather-resistant PA430 features a 60° x 40° dispersion pattern, integral
swivel bracket and a 25-, 70.7-, 100-volt transformer with 1.9-, 3,7-, 7.5-, 15-
and 30-watt taps.
to 10 kHz frequency range, reducing the number of horns needed to cover an area.
The tan, weather-resistant PA430 features a 60° x 40° dispersion pattern, integral
swivel bracket and a 25-, 70.7-, 100-volt transformer with 1.9-, 3,7-, 7.5-, 15-
and 30-watt taps.
Same as PA430T except without a transformer, 8-ohm impedance.
PA430
30-watt constant-directivity paging projector
PA430T
This weather-resistant projector is an excellent choice for any outdoor or indoor public
address/paging application where reliability and durability are important. Driver employs a
rugged phenolic diaphragm and a “rim-centered” ferrite magnetic structure for dependability
under extreme operating conditions. Durable ABS horn and die-cast zinc integral swivel
mount.The tan PA60 provides an 80° x 50° dispersion pattern and 8-ohm impedance.
address/paging application where reliability and durability are important. Driver employs a
rugged phenolic diaphragm and a “rim-centered” ferrite magnetic structure for dependability
under extreme operating conditions. Durable ABS horn and die-cast zinc integral swivel
mount.The tan PA60 provides an 80° x 50° dispersion pattern and 8-ohm impedance.
60-watt reentrant paging projector
PA60
To order or for more information
call 1-800-685-6386
10-watt paging/talkback projector
MIS8C
P
AGING
H
ORNS
The UW30 underwater speaker is equipped with a waterproof, 3-conductor 50-foot cable.
8-ohm impedance, available in pool blue. Underwater speakers are required by the American
Athletic Union for synchronized swimming events and instructions in Olympic pools.They
are also ideal for water ballets or similar water shows and resort or private pools. Built for
installation in both fresh and salt water pools, the UW30 can even be safely installed in
ocean environments. Designed for permanent installation and completely submerged
operation. Problems such as corrosion and electrolysis damage are completely eliminated
due to the plastic construction. The 12.7-ounce ceramic magnet and state-of-the-art
voice-coil construction assure full-fidelity response with the lowest possible distortion
throughout its power range. One speaker is recommended for pools up to 30 by 30
feet, or two speakers for pools up to 30 by 60 feet.
8-ohm impedance, available in pool blue. Underwater speakers are required by the American
Athletic Union for synchronized swimming events and instructions in Olympic pools.They
are also ideal for water ballets or similar water shows and resort or private pools. Built for
installation in both fresh and salt water pools, the UW30 can even be safely installed in
ocean environments. Designed for permanent installation and completely submerged
operation. Problems such as corrosion and electrolysis damage are completely eliminated
due to the plastic construction. The 12.7-ounce ceramic magnet and state-of-the-art
voice-coil construction assure full-fidelity response with the lowest possible distortion
throughout its power range. One speaker is recommended for pools up to 30 by 30
feet, or two speakers for pools up to 30 by 60 feet.
30-watt underwater speaker
UW30
Paging Mics
Ceiling Speakers
EVID
™
Systems
System Examples
Pr
oAnnounce
™
Hor
ns and Drivers
Surface Mount Speakers
Amplifiers
Specifications
MM2
MM2F
MM2TC
UW30
Power Handling
25 watts
25 watts
25 watts
30 watts
(500 Hz-5 kHz pink noise)
Frequency Response
Frequency Response
800 Hz-5 kHz
800 Hz-5 kHz
800 Hz-5 kHz
100 Hz-10 kHz
(±5 dB)
Sensitivity
Sensitivity
104 dB SPL
104 dB SPL
104 dB SPL
N/A
(dB SPL @ 1 W, 1 m)
Nominal Impedance
Nominal Impedance
16 ohms
16 ohms
16 ohms
8 ohms
(w/o line transformer)
Dimensions, in. (cm)
6.0 dia. x 5.0 D
7.3 dia. x 3.8 D
10.0 H x 6.4 W x 4.4 D
7.2 dia. x 2.6 D
(15.2 dia. x 12.7D)
(18.5 dia. x 9.7D)
(25.4 H x 16.3 W x 11.2 D) (18.3 dia. x 6.6 D)
Net Weight
5.3 lb. (2.4 kg)
6 lb. (2.7 kg)
8.8 lb. (4.0 kg)
4 lb. (1.8 kg)
Specifications
PA430 & PA430T
PA60
Power Rating (500 Hz-5 kHz)
30 watts
60 watts
Frequency Response
400 Hz-6.5 kHz, ±5 dB,
600 Hz-6.5 kHz (±5 dB)
350 Hz lower usable limit
Sensitivity 1m
107 dB SPL, 1W, 1m,
107 dB SPL
(500 Hz-5 kHz) pink noise
(500 Hz-5 kHz pink noise)
Impedance
8 ohms nominal
8 ohms
(PA430T: 5-way power selector)
Beamwidth (@ 2 kHz)
60° H (±20°); -6 dB points
80° H x 50° V @ 2 kHz
1 kHz through 10 kHz;
40° V (+20°, -10°); -6 dB points 2 kHz through 10 kHz
40° V (+20°, -10°); -6 dB points 2 kHz through 10 kHz
Directivity Factor, R
θ
(Q)
15.2 @ 2 kHz
7.9 @ 2 kHz
Dimensions, in. (cm)
8.9 H x 12.1 W x 12.2 D
11.0 H x 6.5 W x 8.5 D
(22.6 H x 30.7 W x 31.0 D)
(27.9 H x 16.5 W x 21.6D)
Shipping Weight
PA430: 3 lb. (1.4 kg)
4.1 lb. (1.8 kg)
PA430T: 3.8 lb. (1.7 kg)