Nikon 800 パンフレット
1. Turn the camera off
2. Hold down the MENU button.
3. Turn the select dial to A-REC while continuing to hold down the MENU
2. Hold down the MENU button.
3. Turn the select dial to A-REC while continuing to hold down the MENU
button until an image appears. The screen will display the current firmware
version like: “E800V1.0”. If it reads other than 1.0, your firmware should not
be updated.
version like: “E800V1.0”. If it reads other than 1.0, your firmware should not
be updated.
4. Turn the select dial “Off”. This completes the version confirmation
procedure.
7.0 Preparation
Please make sure that you have the following items available
1. Power source - any one of the following:
1. Power source - any one of the following:
a. The Nikon EH-30 AC Adapter.
b. Four new alkaline or other high capacity batteries, within three months of
b. Four new alkaline or other high capacity batteries, within three months of
date of manufacture
c. Four fully charged rechargeable batteries (size SUM-3 or AA)
2. Cable
a. Nikon SC-EW2 serial cable (Windows)
b. Nikon SC-EW2 serial cable and SC-EM2 conversion cable (Macintosh)
b. Nikon SC-EW2 serial cable and SC-EM2 conversion cable (Macintosh)
3. COOLPIX 800 User’s Manuals
NOTE: Please use only authentic Nikon AC adapters and serial cables; other
products may damage the COOLPIX 800.
products may damage the COOLPIX 800.
8. 0 Connection of Coolpix to your Computer
1.Connect the serial cable to the personal computer.
a. Windows users connect the Nikon SC-EW2 cable to the serial
communication port.
b. Macintosh users connect the Nikon SC-EM2 conversion cable to the
serial communication port. Connect the Nikon SC-EW2 to the SC-EM2
conversion cable.
conversion cable.
For details, refer to the COOLPIX 800 user’s manual.
2.Turn on the COOLPIX 800.
If you have a Nikon EH-30 AC adapter, please connect it to the COOLPIX
800, and plug it into an AC outlet. If you do not have a Nikon EH-30 AC
adapter, please install four new alkaline batteries or four fully charged
rechargeable batteries.
800, and plug it into an AC outlet. If you do not have a Nikon EH-30 AC
adapter, please install four new alkaline batteries or four fully charged
rechargeable batteries.
3.If you are using batteries, be sure to set the auto power-off time (on the
SETUP menu) to 30 minutes, to prevent the camera power from turning
off automatically during the upgrade. For details, refer to the user’s
manual. This setting is not required if you are using the AC adapter.
off automatically during the upgrade. For details, refer to the user’s
manual. This setting is not required if you are using the AC adapter.
4.Connect the serial cable from the personal computer to the serial port on
the COOLPIX 800. For details on connection, refer to the COOLPIX 800
user’s manual.
user’s manual.
5.Set the COOLPIX 800 select dial to A-REC.