Microtek 3700 インストール手順

3

1. Plug the power cord into the back of the scanner, and

plug the other end into a wall outlet or power source.
Make sure no other cable is connected to the

Make sure no other cable is connected to the

Make sure no other cable is connected to the

Make sure no other cable is connected to the

Make sure no other cable is connected to the
scanner except the power cord at this point

scanner except the power cord at this point

scanner except the power cord at this point

scanner except the power cord at this point

scanner except the power cord at this point.

Connect one end of the USB cable to your computer,
and connect the other end of the cable to the scanner’s
USB port.

2. Connect either the FireWire

FireWire

FireWire

FireWire

FireWire or the USB cable

USB cable

USB cable

USB cable

USB cable to your

computer and scanner. (Y

Y

Y

Y

You can use only one

ou can use only one

ou can use only one

ou can use only one

ou can use only one

interface at a time.

interface at a time.

interface at a time.

interface at a time.

interface at a time.)

If your system is FireWire-ready, connect one end of
the FireWire cable to your computer, and connect the
other end of the cable to the scanner's FireWire
connector (either one is applicable).

If your system is not FireWire-ready, you will need to
install a FireWire card. For more details on how to
install the FireWire card, please refer to the FireWire
Installation Guide on a separate sheet included with the
FireWire card.

3. Press the scanner’s power button to turn on your

scanner.

The green light on the front of the scanner will blink for
a few seconds and then stay on solid.

Before connecting, plug the cable connector into the
computer’s port labeled USB “

” logo.

Before connecting, plug the cable connector into the
computer’s port labeled FireWire “ ” logo.

4. The system will detect your scanner automatically.

Power button
Press the scanner’s
power button to turn
the scanner on/off.