Nortel 15000 インストール手順
Installing a Power Module in the Versalar Switch Router 15000
3-10
302764-B Rev 00
13.
Using a Phillips screwdriver, insert and tighten the screw that fastens the
strain relief bracket to the terminal block
strain relief bracket to the terminal block
.
14.
Position the terminal block cover on the terminal block as shown in
15.
Using a Phillips screwdriver, tighten the 2 screws that fasten the cover to
the terminal block.
the terminal block.
Figure 3-7.
Installing the Strain Relief Bracket
Danger:
After the Versalar 15000 is connected to the power source, do not
remove the input leads. You must disconnect the Versalar 15000 from the
power source before removing any wiring.
power source before removing any wiring.
Strain
relief bracket
relief bracket
VRS0053B
-VDC RTN -VDC R
TN