Nortel 15000 安装指导

Installing a Power Module in the Versalar Switch Router 15000

3-10

302764-B Rev 00

13.

Using a Phillips screwdriver, insert and tighten the screw that fastens the
strain relief bracket to the terminal block

14.

Position the terminal block cover on the terminal block as shown in

15.

Using a Phillips screwdriver, tighten the 2 screws that fasten the cover to
the terminal block.

Figure 3-7.

Installing the Strain Relief Bracket

Danger:

After the Versalar 15000 is connected to the power source, do not

remove the input leads. You must disconnect the Versalar 15000 from the
power source before removing any wiring.

Strain
relief bracket

VRS0053B

-VDC RTN -VDC R