Lowrance lmf-400 ユーザーズマニュアル

ページ / 48
36
GPS Position
Displays user position in Latitude/Longitude.
Fuel Manager
The Fuel Manager page has three digital readouts capable of
displaying: Fuel Flow, Fuel Economy, Fuel Remaining, Fuel Range,
Trip Fuel Used, Seasonal Fuel, Paddle Wheel Speed, Pitot Speed and
GPS Speed. While on the Fuel Manager page, press 
MENU
 to access the
Fuel manager menu, which contains the following options: Customize,
Fuel Setup, Pages, Screen, Audio Setup and System Setup.
NOTE
If you have multiple engines, you must go into System Setup and
select Engine Displayed. Here you can select the engine you want to
set up. The Fuel Management page shows the engine you selected
at the bottom of the page.
To Customize the Fuel Manager Page:
1. Scroll through pages set for display using the 
ENTER
 and 
EXIT
 keys.
2. Once the Fuel Manager page is displayed, press 
MENU
, select
C
USTOMIZE
 and press 
ENTER
.
3. The menu prompt will appear with the follow options: Top Data,
Center Data and Bottom Data. Use the 
UP
 and 
DOWN
 keys to highlight
the data box you want to customize and press 
ENTER
.
4. Scroll through the list and highlight the desired item, then press
ENTER
. This will take you back to the menu prompt. If you want to
customize other data, repeat the steps above, otherwise press 
EXIT
,
EXIT
. The information you selected will be displayed on the screen.
Fuel Setup
1. To access the Fuel Setup menu, press 
MENU
 while viewing the Fuel
Manager page, which will bring up the Fuel Manager page menu.
2. Select 
F
UEL 
S
ETUP
, then press 
ENTER
.
The Fuel Setup menu contains the following categories:
 
Adjust
Calibration, Fuel Remaining Source, Reset Seasonal,  Refill Tank,
Partial Fill, Eco Speed Source and
 
Reset Trip Fuel.
Adjust Calibration
1. From the Fuel Setup menu, select 
A
DJUST 
C
AL
 and press 
ENTER
.
2. Use the 
UP
 and 
DOWN
 keys to input the desired calibration
adjustment, then press 
ENTER.
Fuel Remaining Source
The Fuel Remaining Source menu prompts you to choose what sensor
will be used to monitor your fuel level. There are two options: Engine
Fuel Flow and
 
Fluid Level Sensor.