Lowrance lmf-400 ユーザーズマニュアル

39

2. In this example, we'll select 

 and press 

. A small menu

will appear, giving you the option to turn off the alarm or set the depth.
3. Select 

 and press 

4. Use the 

 and 

 keys to select the desired depth and press

. To set the Deep alarm, press 

, select 

 from the alarms

menu and press the 

key.

Sonar Alarms highlighted on System Setup menu (left). Sonar Alarms

menu (center); Reset Values selected on System Setup menu (right).

5. Choose 

then use the 

 and 

 keys to set the alarm to

the desired depth. Press 

|

|

 to return to the System

Setup menu.

Engine/Tank Configuration
1. From the System Setup menu, scroll down to 

 and press

. Boat Setup will be highlighted. Press 

, which will bring

up the following message: Press Enter to reset Eng/Tank Cfg. Press

.

3. The Boat Setup title bar will appear on the screen. Press 

 to

access the Boat Setup menu. The Boat Setup menu options are: 1 Eng/1
Tank, 1 Eng/2 Tank, 2 Eng/1 Tank, 2 Eng/2 Tanks, 3 Eng/1 Tank or 3
Eng/3 Tanks.
4. Choose the option that applies to your vessel and press 

, which

will bring up the Set Tank Size menu. It will appear with up to three
options, depending on the number of tanks you chose during Boat
Setup. The options are: Port Tank,  Stbd Tank and Cen Tank.

(If you

selected one tank during Boat Setup, you won't see any of these options.
You will be taken directly to the Setting Tank Size Window.)
5. Select the tank you want to set up and press 

, which will

launch the Setting Tank Size window.
6. Use the 

 and 

 keys to enter how many gallons the tank will

hold and press 

.

Press 

 and repeat steps 3 and 4 for each of the remaining tanks.

7. After all tanks on your vessel have been setup, press 

 repeatedly

to be directed back to the main display.