Lowrance lms-334c igps 操作ガイド

ページ / 204
114
Create Waypoint by Entering a Position
1. Press 
WPT
, select 
M
W
AYPOINTS
|
→ to 
S
UBCATEGORY
 |
↓ to 
N
EW
|
ENT
.
2. Press 
↓ to 
E
NTERED 
P
OSITION
|
ENT
|
→ to 
C
REATE
|
ENT
.
3. Press 
→ to 
L
ATITUDE
|
ENT
. Enter the latitude by pressing 
↑  ↓ to
change the first character, then press 
→ to the next character and re-
peat until the latitude is correct. Press 
ENT
.
4. Press 
↓ to 
L
ONGITUDE
|
ENT
. Enter the longitude by pressing 
↑  ↓ to
change the first character, then press 
→ to the next character and repeat
until the longitude is correct. Press 
ENT
, then press 
EXIT
 repeatedly to
get back to the main page display.
5. You can also edit your position from the map by selecting
 
E
DIT 
P
OSITION
FROM 
M
AP
 and pressing 
ENT
. Center the cursor crosshairs on the desired
location and press 
ENT
, which will create a waypoint at that position.
Navigate To a Waypoint
You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:
1. Press 
WPT
, select  
M
W
AYPOINTS
|
→ to 
S
AVED
|
ENT
. To look up the
nearest waypoint, press  
 
to 
N
EAREST
|
ENT
 or to look by name press
ENT
. For this example, look by name.
2. If your waypoint list is a long one, you can spell out the waypoint name
in the 
F
IND 
B
N
AME
 box to search for it. Press 
↑ ↓ to change the first char-
acter, then press 
→ to move the cursor to the next character and repeat
until the name is correct, then press 
ENT
 to jump to the list below.
3. If the list is short, you can jump directly to the 
F
IND 
I
L
IST
 box by
pressing 
ENT
. Use 
↑ ↓ to select the waypoint name, press 
ENT
 and the
waypoint information screen appears with the 
G
T
O
 command selected.
4. To begin navigating to the waypoint, press 
ENT
.