Руководство По Работе для Lowrance lms-334c igps

114

1. Press 

, select 

|

→ to 

 |

↓ to 

|

.

2. Press 

↓ to 

|

|

→ to 

|

.

3. Press 

→ to 

|

. Enter the latitude by pressing 

↑  ↓ to

change the first character, then press 

→ to the next character and re-

peat until the latitude is correct. Press 

.

4. Press 

↓ to 

|

. Enter the longitude by pressing 

↑  ↓ to

change the first character, then press 

→ to the next character and repeat

until the longitude is correct. Press 

, then press 

 repeatedly to

get back to the main page display.

5. You can also edit your position from the map by selecting

 and pressing 

. Center the cursor crosshairs on the desired

location and press 

, which will create a waypoint at that position.

Navigate To a Waypoint

You can select any waypoint visible on the Map Page with the cursor,
then use the Navigate to Cursor command (we'll describe how later in
this section.) However, you can avoid scrolling the map to pick your
waypoint if you use the Find Waypoint commands:

1. Press 

, select  

|

→ to 

|

. To look up the

nearest waypoint, press  

↓

 

to 

|

 or to look by name press

. For this example, look by name.

2. If your waypoint list is a long one, you can spell out the waypoint name
in the 

 box to search for it. Press 

↑ ↓ to change the first char-

acter, then press 

→ to move the cursor to the next character and repeat

until the name is correct, then press 

 to jump to the list below.

3. If the list is short, you can jump directly to the 

 box by

pressing 

. Use 

↑ ↓ to select the waypoint name, press 

 and the

waypoint information screen appears with the 

 command selected.

4. To begin navigating to the waypoint, press 

.