Lowrance lms-522c igps 操作ガイド

40 

To insert a MMC or SD Card 
1. Open the card compartment door. 
2. Grasp the bottom of the MMC and push the top of the card into the 

slot. Once the card is started, use your fingernails to slide it the rest of 

the way to the left, until it is firmly seated in the slot. 
3. Close the compartment door and fasten the thumb screw finger tight. 

LMS-522c and LMS-527cDF accessories include MMC cards, MMC 

card readers and MapCreate™ 6 mapping software for your computer. 

MMC card readers are available in USB and parallel port versions. 
Two switch boxes are available for this unit. The SB-7X transducer 

switch box switches two transducers to one sonar unit. The SB-8X trans-

ducer switch box switches two sonar units to one transducer. 
If these accessories are not available from your dealer, see the acces-

sory ordering information on the inside back cover of this manual. Visit 

our web site for a complete listing of all the available accessories. 
Cleaning Towel 
A lint-free microfiber towel is included for cleaning the unit’s screen. 

The towel is highly effective in clearing away water spots, smudges and 

finger prints. Just wipe the screen with the dry towel — it's not neces-

sary to moisten the towel with water. If the screen is badly soiled, you 
may use water or common window or lens cleaners. DO NOT use pol-

ishing compounds or any other abrasive product.  

If you lose the towel or wear it out, you can replace it with a similar 

microfiber cloth. These are often available where shop towels or auto-

mobile cleaning towels are sold. 
Caution: