Adaptec rs ユーザーガイド
2-6
Unpacking and Initial Setup
release the ejection button and turn the key to the right. If the button is not
fully protruded, apply additional pressure to the front of the carrier until it is.
fully protruded, apply additional pressure to the front of the carrier until it is.
4.
Pull gently on the carrier to ensue that it does not come out and is locked in
place
place
Advanced Cooling Module Insertion
The RAIDstation7 Fibre Channel Storage Array supports three ACMs mounted
in the rear.
in the rear.
Installing an Advanced Cooling Module (ACM)
1.
Hold the ACM at 90
o
to the rear of the Storage Array.
2.
Slide the ACM into an empty ACM slot (see Figure 2-3).
3.
Using the two panel fasteners on the ACM assembly secure the ACM in
place.
place.
Figure 2-3. Installing an ACM