3com S7906E 参照ガイド
1-9
display ip multicast routing-table
Syntax
display ip multicast routing-table [ verbose]
View
Any view
Default Level
2: Monitor level
Parameters
verbose: Displays the detailed information of the multicast routing table, including both inactive and
active multicast routes. Without the keyword, the command displays brief information about only the
active MBGP routes.
Description
Use the display ip multicast routing-table command to display the multicast BGP routing table.
All the active MBGP routes in the MBGP routing table are used for RPF check, but inactive MBGP
routes are not.
Examples
# Display brief information about the active routes in the multicast BGP routing table.
<Sysname> display ip multicast routing-table
Routing Tables: Public
Destinations : 6 Routes : 6
Destination/Mask Proto Pre Cost NextHop Interface
2.2.2.0/24 Direct 0 0 2.2.2.1 Vlan-interface2
2.2.2.1/32 Direct 0 0 127.0.0.1 InLoopBack0
127.0.0.0/8 Direct 0 0 127.0.0.1 InLoopBack0
127.0.0.1/32 Direct 0 0 127.0.0.1 InLoopBack0
192.168.80.0/24 Direct 0 0 192.168.80.10 Vlan-interface1
192.168.80.10/32 Direct 0 0 127.0.0.1 InLoopBack0
Table 1-2 display ip multicast routing-table command output description
Field
Description
Destinations
Number of destinations
Routes
Number of routes
Destination/Mask Destination address /Mask length
Proto
Routing protocol that discovered the route
Pre Route
preference
Cost Route
cost
Nexthop
Next hop of the route