3com S7906E 참조 가이드

 

1-9 

display ip multicast routing-table [ verbose] 

Any view 

2: Monitor level 

verbose: Displays the detailed information of the multicast routing table, including both inactive and 

active multicast routes. Without the keyword, the command displays brief information about only the 

active MBGP routes. 

Use the display ip multicast routing-table command to display the multicast BGP routing table.  

All the active MBGP routes in the MBGP routing table are used for RPF check, but inactive MBGP 

routes are not. 

# Display brief information about the active routes in the multicast BGP routing table. 

<Sysname> display ip multicast routing-table 

Routing Tables: Public 

         Destinations : 6        Routes : 6 

 

Destination/Mask    Proto  Pre  Cost         NextHop         Interface 

 

2.2.2.0/24          Direct 0    0            2.2.2.1         Vlan-interface2 

2.2.2.1/32          Direct 0    0            127.0.0.1       InLoopBack0 

127.0.0.0/8         Direct 0    0            127.0.0.1       InLoopBack0 

127.0.0.1/32        Direct 0    0            127.0.0.1       InLoopBack0 

192.168.80.0/24     Direct 0    0            192.168.80.10   Vlan-interface1 

192.168.80.10/32    Direct 0    0            127.0.0.1       InLoopBack0 

Table 1-2 display ip multicast routing-table command output description  

Destinations 

Number of destinations 

Routes 

Number of routes 

Destination/Mask Destination address /Mask length 

Proto 

Routing protocol that discovered the route 

Pre Route 

preference 

Cost Route 

cost 

Nexthop 

Next hop of the route