3com S7906E 参照ガイド
1-18
# Display information about all NHLFE entries.
<Sysname> display mpls nhlfe
Out-Interface Token Oper Nexthop Deep Stack
----------------------------------------------------------------------
Vlan2 2 PUSH 88.1.1.2 1 1024
Table 1-9 display mpls nhlfe command output description
Field
Description
Token NHLFE
entry
index
Oper Operation
type
Deep
Depth of the MPLS label stack
Stack MPLS
label
display mpls route-state
Syntax
display mpls route-state [ vpn-instance vpn-instance-name ] [ dest-addr mask-length ]
View
Any view
Default Level
1: Monitor level
Parameters
vpn-instance vpn-instance-name: Specifies routes of a VPN instance. The VPN instance name is a
case-sensitive string of 1 to 31 characters.
dest-addr mask-length: Specifies routes to a destination address. The mask length is in the range 0 to
32.
Description
Use the display mpls route-state command to display LSP-related route information.
With no VPN instance specified, the command displays information about the routes of the public
network instance.
Examples
# Display LSP-related information about all routes.
<Sysname> display mpls route-state
DEST/MASK NEXT-HOP OUT-INTERFACE STATE LSP-COUNT VPN-INDEX
-----------------------------------------------------------------
1.1.1.1/32 10.0.0.1 Vlan2 ESTA 1 0